Sunday, 15 July 2012

CONTROL PRICE OF HOUSE


Nowadays, we can see a price of houses suddenly very expensive that not cross in mind. According trusted information, a high price of new houses is because of a rising of building materials prices. Besides that, a factor of location is a main cause of the price of a new house become expensive. As we aware, an expensive of houses price cannot be controlled.

Is it housing price risings are a package for us to become a develop country? My answer is no.  Certain of rich country, house and consumable items are cheap.  In our country, we have a lot of building materials such as sand, cement, steels etc. With a lot of building materials and plenty of lands to be developed should hinder the high price of houses.

As a conclusion, we must be seriously looking into this issue

Saturday, 14 July 2012

CAR BATTERY INDICATOR




Why do we need battery indicators to our car especially automatic cars? If you drive an automatic car, unfortunately, your car don't have battery indicator which same goes to most of other cars nowadays definitely will cause a problem due to battery failed to deliver power. What happens if you don't bring a jumper or you don't know how to use the jumper? I can see a lot of problems and more problems arise if it happens in isolating areas. If your car system comes with a lot of an electronic gadget, suddenly the electronic gadget will fail and when you change a new battery might fail your engine to start.

Through this experience, the car manufacturer should do some research and development to materialize battery indicator, especially for the automatic car. This will add value to their car brand. As a warning for those who drive automatic cars, please check your battery condition before you make your journey.

Tuesday, 10 July 2012

BIG PROFIT TO FAST TECHNOLOGY PRODUCTS




Currently, the technology moves so fast.  Obviously, we can see fast moving technology in a field of electronic items such as computer and handphones.  In addition, car technology, aircraft technology, military technology and maritime technology also progress. Rapid progress causes a user and a maintainer group can’t afford to follow. This opportunity has led producers in these areas earn big profit. This is because the manufacturer can control the income from selling goods and maintenance of goods and produce new products with a new brand (not much change in performance). This process is a complete cycle that resembles the concept of monopoly. No wonder at the end of the year, profit producers reach billions.

I think to compete in a rapid development of technology by the more local company to concentrate on research and development.  A country must have its own technology in an area of this fast moving item. Technology itself can generate income and help to overcome the government and people that heavily invested in the acquisition of goods. Further become worst and waste in the maintenance, more money goes to maintenance because local people don’t know how to maintain equipment and products. Conversely, if a goods produced by local people of course maintenance issues, procurement, and affordable prices can be controlled properly.

Thursday, 31 May 2012

TOTAL GREEN TECHNOLOGY MANAGEMENT




Total Green Technology Management is a concept of a way a green technology management can help to improve a clean environment. The concept basically is an application needed to a human brain to safe and secure of the universe. The clean environment started at home, the road to the office/workplace and the environment of office/workplace itself. At home the clean/green environment can be managed by family/home member by ensure all the waste and rubbish are free from their home area and the family/home member is responsible to plant the tree or the beautiful grass. The government authority is responsible to clean/green along a roadside of the road whereby respective owner namely government, company or individual are responsible to clean/green the area of office/workplace.  

The simple concept of total green management to the three entities such as clean/green the house, clean/green the roadside to office/workplace and clean/green the area of office/workplace definitely will improve the health, safety and the beauty of a nation and indirectly will improve the output or productivity of the nation. This also will encourage tourism activity to the country.

Technology is the most important role to support the total green technology management. The green technology must be applied to every product related to human lives such as vehicles, machinery, and all products are used in daily lives including the technology in process making, the technology in material used and the technology of operating system of the products.

Finally, in Islam stated sanctity, green custodial and appreciating the universe are good practice.

Wednesday, 30 May 2012

EDUCATING YOUNG ENGINEER




After graduate engineering degree course with the average of 120 credits taken by an engineering student in various recognized university entitle them to call as a young engineer in the marketplace. As the young engineer, of course, he/she is very eager to participate in real engineering practice/work. However, with the minimum knowledge and experience little bit arrest the young engineer successive stop them from involve in real work.

To hinder this problem occur, the new graduate engineer should be placed under the supervision of a senior engineer who experienced enough in their field. The young engineer must learn as much and as fast as possible he/she can from the senior engineer on doing the thing in engineering work. Since a technology is very fast moving, the young engineer with guided of the senior engineer must learn very fast in their field and master their field as soon as possible. By mastering the job, definitely will reduce the stress which nowadays stated as the number one killer.

Hopefully, by doing this practice will help to reduce the weight on engineer shoulders in this modern world, which market rapid introducing the new things/process. Actually, engineer as a human being created by Allah needs enjoy living same to other professions.

Wednesday, 23 May 2012

NEW CHALLENGE TO ENGINEER



1.         A nation, when grow up will need a lot of creative engineers.  One of the criteria to become an advanced country needs to become industrialize to match up with the living style of her population. At the advanced nation stage, the engineering is not just a techniques or processes of doing a thing, but also about innovative thinking.

2.         The weight on the shoulders of engineers have become heavier to create or to find ways of designing new things for better living in realizing dreams.

3.         The concepts to support the new challenge of engineer that I can foresee.

a.         The new education concept.    The way of teaching students to become engineer should be started with theory and support with repeated hands-on or practical. The future engineer also must be exposed with strong believe in their own religious for better responsible in engineering duties.

b.         The continuous learning concept.  As an engineer, continuous learning plays an important role which the new knowledge and new concept applied on doing things or products. The skills of the engineers must update time to time accordingly suitable with time and environment. The continuous learning concept and practice must put on the shoulders of the engineers. 

c.         The continuous practice concept. The knowledge of the engineers must be practiced and applied. The engineers must find or establish their club which lead by the most knowledgeable and capable leader who capable of guiding and updating their knowledge and skills.

4.         Thus, the continuous and repeatable in doing things are the magic words for the engineers. Eventually, the engineers as a human who created by creator need to repeat to upgrade themselves which same practice in the Muslim on performing five times prayer as directed who done repeatably on an everyday basis.  

Abrasive Machining and Finishing Operations Abrasive Machining

  Abrasive machining is one of the best methods for producing accuracy and fine finishing on parts. An abrasive machine used high technology...